Port Authority of NY & NJ


Industry:

Industry:
Less

Client:

Client:

Less

Location:

Location:

Less

General Contractor:

General Contractor:

Less

Engineers:

Engineers:

Less
Piers & Wharfs Less
Piers & Wharfs

Port Authority of NY & NJ

Port Authority of NY & NJ

Less

LaGuardia Airport, NY City

LaGuardia Airport, NY City

Less

Beaver Construction

Beaver Construction

Less

In early 2006 Walker Diving was contracted by Beaver Concrete Construction to remove and install over 700 anodes at LaGuardia airport for the Port Authority of NY & NJ for most of 2006. The anodes to be removed consisted of a bracket-supported zinc piece on a long piece of rebar. The new anodes were attached to the pile using clamps and set screws. This project had its own set of challenges – for example, it was very tide dependent as the low clearance prevented work during high tide, requiring off-hour shifts. There was also other work being carried out which meant a good amount of coordination was needed.

In early 2006 Walker Diving was contracted by Beaver Concrete Construction to remove and install over 700 anodes at LaGuardia airport for the Port Authority of NY & NJ for most of 2006. The anodes to be removed consisted of a bracket-supported zinc piece on a long piece of rebar. The new anodes were attached to the pile using clamps and set screws. This project had its own set of challenges – for example, it was very tide dependent as the low clearance prevented work during high tide, requiring off-hour shifts. There was also other work being carried out which meant a good amount of coordination was needed.

Less

Airplane Landing on Runway

Airplane Landing on Runway

Less
Bridge Runway

Old Anode to be Replaced

Old Anode to be Replaced

Less
Pillars